Authors
-
Paras S. Vanarse
Rajarambapu Institute of Technology, Islampur, Maharashtra
-
Manasvi M. Gondhale
Rajarambapu Institute of Technology, Islampur, Maharashtra
-
Adhiraj S. Mali
Rajarambapu Institute of Technology, Islampur, Maharashtra
-
Tejas B. Jagtap
Rajarambapu Institute of Technology, Islampur, Maharashtra
-
A.B. Kakade
Rajarambapu Institute of Technology, Islampur, Maharashtra
Keywords:
Keypad, LCD, PIC18F4520, Relay module, Water sensor
Abstract
The project aims to automate the water recycling plant which is used for the wastewater treatment plant at Rajarambapu Institute of Technology (RIT). The current wastewater treatment plant process is manual, and requires a significant amount of manpower. This project will automate the plant using sensors, actuators, and controllers to reduce the need for manual labour and improve the efficiency of the water recycling process. A PIC18F4520 microcontroller is used in the project to control the entire process. Normal valves are replaced by solenoid valves which will be operated by a relay driver circuit. Different modes are created with a keypad and displayed on a 16x2 LCD. A water sensor has been made to sense the water level in tanks.
Author Biographies
Paras S. Vanarse, Rajarambapu Institute of Technology, Islampur, Maharashtra
Under Graduate Student, Department of Electronics & Telecommunication Engineering
Manasvi M. Gondhale, Rajarambapu Institute of Technology, Islampur, Maharashtra
Under Graduate Student, Department of Electronics & Telecommunication Engineering
Adhiraj S. Mali, Rajarambapu Institute of Technology, Islampur, Maharashtra
Under Graduate Student, Department of Electronics & Telecommunication Engineering
Tejas B. Jagtap, Rajarambapu Institute of Technology, Islampur, Maharashtra
Under Graduate Student, Department of Electronics & Telecommunication Engineering
A.B. Kakade, Rajarambapu Institute of Technology, Islampur, Maharashtra
Senior Professor, Department of Electronics & Telecommunication Engineering
