Development and Designing of Automatic Wire Cutting System using ARM 7

Abstract

In recent years of technology, automation has reduced human efforts and errors to a large
extent. The development of this system will reduce human efforts required to cut the wire in
proper length. The system contains an input module so that appropriate output can be
obtained from the system. In existing system in factory there are workers for manually cutting
wire. All the time required for cutting different length wires depends on efficiency of workers.
Quality depends on accuracy & skill of workers. To overcome this automatic wire cutting
system is developed. ARM 7 (LPC 2138) microcontrollers is used to control the operation of
the system. If this system is used then time required for cutting the wires will be saved.
Workers cost is also saved. If we directly give command to the system that cut this number of
wires of these lengths, then this system produces exact number of cut wires and of exactly
same size in less time. This system increases the efficiency of industry by saving time and
money.